Remove Water & Debris, Restore Clarity
Using calibrated sound waves, our app safely ejects water, dust and debris to bring back crisp audio.
Clean and dry your phone or laptop speakers in minutes. Pick a mode, press Start. Advanced tuning is optional. Works offline as a PWA.
Advanced settings
How SpeakerCleanerPro Works
Fixed Tone
Play a continuous tone (e.g., 165 Hz or 1 kHz) to vibrate the diaphragm and expel light moisture or dust.
Water Eject
Short square-wave bursts at calibrated frequencies help dislodge water droplets trapped behind the speaker mesh.
Sweep Mode
Run a frequency sweep (100–16,000 Hz by default) to cover resonances that may loosen debris across devices.
Safety First
Keep Volume Reasonable
Start at 60–70% volume. We hard-cap the internal gain to ~85% to reduce the risk of damage.
Short Sessions
1 to 3 minutes is usually enough. Let speakers cool between runs.
No Physical Poking
Do not insert objects into the speaker grille use a soft cloth to wipe away expelled moisture.
Compatibility
Works in modern browsers on iOS, Android, Windows, macOS, and Linux. For best results, use HTTPS and enable sound for this page. Add to Home Screen to use it offline (PWA).
- iPhone / iPad (Safari / Chrome)
- Android (Chrome)
- Laptops / Desktops (Chrome, Edge, Firefox, Safari)
Frequently Asked Questions
Works in modern browsers on iOS, Android, Windows, macOS, and Linux. For best results, use HTTPS and enable sound for this page. Add to Home Screen to use it offline (PWA).
Can this fix a damaged speaker?
No, this tool helps remove water and dust. It cannot repair torn cones or hardware faults.
Which frequency should I try first?
Start with Water Eject at 165 Hz for 1–2 minutes. If needed, run a 100–16,000 Hz sweep once.
Is it safe at full volume?
Avoid 100% volume for long periods. We limit gain internally, but you should still monitor heat and sound.
Does it work offline?
Yes. Install it to your home screen; the service worker caches core files for offline use.